Medline Bathtub Safety Grab Bar with Handle Clamps

See directions below.

See directions below. Assembly Instruction Open the clamp by turning the adjustment knob counter-clockwise
Place the clamp over the sidewall of the tub with adjustment knob positioned on the out-side of tub and secure tightly by turning adjustment knob clockwise; Improper installation can cause injury when exiting the tub
If the grab bar becomes wet/soapy it may become slippery
The tub's grab bar knob protrudes away from the tub; When entering or leaving the tub, use care to avoid injury from the protruding knob
To assure the user maintains their balance when using the tub grab bar, always test for stability by vigorously attempting to lift and move unit sideways
If unit is clamped correctly, it should be extremely stable and rigid, even when substantial forces are applied

See warnings below. Weight Capacity: 250 LBS, DO NOT EXCEED WEIGHT CAPACITY
The bath tub wall, both inside and out, should be clean of soap or waxy residues and free of any obstructions; This is essential if the clamping action is to work correctly
Ensure all surfaces and clamping pads are dry and free of soapy residue; Clean and dry before each installation
On certain types of tub surfaces (i.e. fiberglass or thin steel tubs), use extreme care not to over tighten the knob; If the knob is over tightened, the clamp may crack the tub
The flat surface of the base of the tub grab bar should rest directly on the top of the tub wall; If a shower doortrack interferes with this contact, the unit should not be installed
Check the tub grab bar for tightness and stability before each use